Sứ Lót Đường Hàn Dong IL Korea Công ty TNHH Đại Hải Đăng : Công ty TNHH Đại Hải Đăng

Mô tả sản phẩm

Sứ lót đường hàn Dong iL Korea

Ceramic backing – Sứ lót đường hàn được sử dụng rộng dãi trong ngành công nghiệp đóng tàu, kết cấu thép, đường ống, bồn bể.

– Nhà sản xuất: DONG IL ENG CO., LTD

– Technology of Korea

– Xuất xứ: Made in Việt Nam

Đại Hải Đăng Cung Cấp Các Loại Sứ Lót Đường Hàn:

- Sứ lót đường hàn Tròn.

- Sứ lót đường hàn rãnh Dẹt.

- Sứ lót đường hàn Bằng.

- Sứ lót đường hàn góc…

Đại lý phân phối sản phẩm chính hãng từ nhà máy sản xuất.

Thông Số Chi Tiết


	Standard type for one-side welding with CO2¸ and CO2+Ar shielded gas
	Apply to shipbuilding, steel structure and offshore structure


	Standard type for one-side welding with CO2¸ and CO2+Ar shielded gas
	High efficiency products


	8mm round groove(Suitable for less than 6mm gap)
	Suitable for welding of thin plate under 12mm thickness


	For horizontal welding


	Especially designed for welding of thin plat less than 6mm thickness


	Standard type for one-side welding with CO2¸ and CO2+Ar shielded gas
	Although the welding is performing in the rainy day, can get the non-defected result by free from moisture absorptivity.
	Mainly used in european market.


	Designed for preventing undercut and overlap occurred when the horizontal welding is performed.


	Apply to the front-up of the base metal in the horizontal welding
	Prevent the end of base metal from burn through when the last layer is performed


	Apply to build-up welding without back bead
	Suitable for standard gap


	Apply to build-up welding without back bead
	Suitable for wide gap


	For chamfering section


	Apply to difference portion of the base metal thickness


	Apply to horizontal fillet welding for beam, box and steel structure and etc
	Suitable for T-joint welding


	For the T, X, K, H joint welding
	For the welding of thick plate, pressure vessel and heavy duty structures
	According to root gap, choosed size 5φ , 7φ , 10φ , 12φ , 15φ


	According to X-joint, choosed type 42˚ , 55˚ , 83˚


	For the welding of stem and stern
	When the base metal has a special direction, can be applied this model


	For the welding of rectangular groove
	When makes angle, it can be completely performed with WS-601 at the linear portion and welding cost can be reduced


	For the welding of rectangular grooveFor the welding of rectangular groove
	When the base metal has a special driection(i.e.downward), can be applied this model


	For the welding of stem and stern
	Suitable for 10mm~20mm root open


	For the welding of hatchway, hatch cover and manhole
	According to the radius of plate, applied the size R53, R100, R150, R200, R250, R300


	Apply to welding of transverse area on the pipe(220~260φ)


	Suitable for widely back bead requirement


	Order production
	For the 45 angle type

NO	Product Name	Quantity (EA/BOX)	Weight (Kg/BOX)	Width (mm)	Length (mm)	Height (mm)	Note
1	WS-601	30	10.5	1,035	150	60
2	WS-601V	30	10.5	1,035	150	60
3	WS-601B	30	11.0	1,035	150	60
4	WS-601C	30	9.0	1,035	150	60
5	WS-601D	30	11.0	1,035	150	60
6	WS-601E	30	11.4	1,035	150	60
7	WS-601H	30	8.0	640	270	60	600mm
8	WS-HFT	30	7.0	640	270	60	600mm
9	WS-602	30	11.0	1,035	150	60
10	WS-602W	20	12.5	1,035	150	70
11	WS-604 A, B	30	11.0	1,035	150	70
12	WS-604M	30	11.0	1,035	150	60
13	WS-605	25	8.5	1,035	150	70
14	WS-606-5	30	2.5	1,035	100	55
15	WS-606-7	30	2.7	1,035	100	55
16	WS-606-10	30	5.5	1,035	110	55
17	WS-606-12	30	6.0	1,035	150	60
18	WS-606-15	30	9.8	1,035	270	60	600mm
19	WS-607B	30	8.0	1,035	270	60
20	WS-608	30	11.0	1,035	150	60
21	WS-610A	140	8.0	1,035	390	60
22	WS-610C	100	6.0	640	390	60
23	WS-611	20	11.2	1,035	390	70
24	WS-612-100R	10(Set)	4.0	490	390	90
25	WS-612-150R	10(Set)	4.5	490	390	90
26	WS-612-150RA	20(Set)	9.0	490	390	90
27	WS-612-200R	10(Set)	5.0	490	390	90
28	WS-612-250R	10(Set)	7.3	490	390	90
29	WS-612-300R	10(Set)	8.2	490	390	90
30	WS-613	30	8.0	640	270	60	600mm
31	WS-600	16	10.2	620	215	50	600mm
32	WS-600A	16	11.0	620	215	50	600mm
33	SAW-10	20	8.0	620	220	55	600mm
34	SAW-30	20	8.0	620	220	55	600mm